Page 10
For technical questions, please call 1-888-866-5797.
Item 57921
SAFET
Y
OP
ERA
TIO
N
M
A
IN
TE
N
A
NC
E
SETU
P
Work Area
1. Designate a work area that is clean and well lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
Saw Blade Selection
1. Any saw blade that will be used must be
marked as suitable for the material to be cut.
2. Use only a saw blade diameter in
accordance with the markings on the saw.
See specification table for the bore diameter
and the maximum kerf of the saw blade.
3. Use only saw blades that are marked with a speed
equal or higher than the speed marked on the tool.
Guard Setup
Check that the Lower Blade Guard is in place,
moves freely, and closes instantly.
Dust Extraction Setup
1. To use the Dust Collection Bag, slide the Bag
over the Dust Outlet at the rear of the Saw Head
Assembly. Refer to
Assembly
on page 8.
2. Connect a dust extraction device to
the Dust Outlet to use a dust collection
system instead of the Dust Bag.
