Page 12
For technical questions, please call 1-888-866-5797.
Item 64533
S
AFE
ty
Op
ERA
ti
O
n
M
A
int
E
n
A
nc
E
S
E
t
U
p
inflating and Deflating Using Low pressure Hose - Large inflatables
tO pREVEnt OVERHEAtinG WHiLE inFLAtinG, keep the air intake and vents clear
of obstructions. Always wear AnSi-approved eye protection during use.
note:
The Inflator/Deflator has a sleep mode feature that powers off the unit after approximately
5 minutes of nonuse. Press the Power button to turn ON the Inflator/Deflator.
inflating
1. Remove Low Pressure Hose from its storage area.
2. Connect Low Pressure Hose to
Low pressure Air Output.
Align the slots in the hose to the pins and turn the
hose counter clockwise until it locks in place.
Low
pressure
Air Output
3. Connect other end of the hose to the item
to be inflated. Connect the hose directly or
use the Adapter attached to the hose.
4. Press Power Button (Inflating will not start yet).
WARninG! tO pREVEnt SERiOUS inJURy
FROM EXpLOSiOn: Do not overinflate.
Do not leave unit unattended while inflating.
5. To start inflating, press the
Pump Selection Switch to Low Pressure (II).
6. To stop inflating, press the
Pump Selection Switch to Off (O).
7. When finished, remove hose.
8. Turn off the unit by pressing and
holding the Power button.
9. Unplug or remove Battery Pack after use. Clean,
then store the unit indoors out of children’s reach.
Deflate
1. Remove Low Pressure Hose from its storage area.
2. Insert Low Pressure Hose fully into Air Intake.
Air
intake
3. Connect other end of the hose to the item
to be deflated. Connect the hose directly or
use the Adapter attached to the hose.
4. Press Power Button (Deflating will not start yet).
5. To start deflating, press the
Pump Selection Switch to Low Pressure (II).
6. To stop deflating, press the
Pump Selection Switch to Off (O).
7. When finished, remove hose.
8. Turn off the unit by pressing and
holding the Power button.
9. Unplug or remove Battery Pack after use. Clean,
then store the unit indoors out of children’s reach.