Page 11
For technical questions, please call 1-888-866-5797.
Item 63630
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
General Operating Instructions
1. Make sure that the Trigger is in the off-position
and locked, then attach the Battery Pack.
2. Make all necessary adjustments to the Saw.
3. Make sure that all guards are in place in
proper working order and that all adjustment
knobs are tight before operation.
4. Press Laser Guide Button to turn the Laser on.
5. Hold Saw so that Blade is near the start of
cut, but not touching the workpiece.
IMpORTANT:
Do not start the Saw if the
Blade is in contact with anything.
6. Firmly grip the Handle with one hand, push
Trigger Lock from either side, then press Trigger.
7. To increase speed, apply more pressure to
Trigger. To decrease speed, apply less pressure.
Note:
When cutting softer materials,
use a faster speed. When cutting harder
materials, use a slower speed.
8. Allow the Saw to come up to full speed
before touching the workpiece.
9. Guide the Blade into the workpiece.
WARNING!
Keep the Shoe pressed firmly against
the workpiece while cutting to prevent kickback.
10. Maintain a smooth motion, guiding the Blade
through the material as it is cut. Follow the cut.
Do not press too hard. If the Saw slows down as
it is cutting, apply less pressure on the Saw.
11. To stop the Saw, release the Trigger.
12. Allow the Saw to come to a complete
stop before setting it down.
13. Press Laser Guide Button to turn the Laser off.
14. To prevent accidents, turn off the tool and
remove its Battery Pack after use. Clean, then
store the tool indoors out of children’s reach.