Bauer 1772C-B Скачать руководство пользователя страница 13

Страница: 13 / 16

Page 13

For technical questions, please call 1-888-866-5797.

Item 63634

AFET

ERA

TION

AINTENAN

ETU

Troubleshooting

problem

possible causes

Likely Solutions

Tool will not start.

1. Battery Pack not properly connected.

2. Battery Pack not properly charged.

3. Battery Pack burnt-out.

4. Internal damage or wear. (Carbon

brushes or Trigger, for example.)

1. Remove Battery Pack, make sure there are no

obstructions, reinsert the Battery Pack according
to its shape (it should only fit one way), and press
firmly until the Battery Pack locks in place.

2. Make sure Charger is connected and

operating properly. Give enough time for
Battery Pack to recharge properly.

3. Dispose of old Battery Pack properly or recycle.

Replace Battery Pack.

4. Have technician service tool.

Tool operates slowly.

1. Forcing tool to work too fast.
2. Battery Pack wearing out.

1. Allow tool to work at its own rate.
2. Dispose of old Battery Pack properly or recycle.

Replace Battery Pack.

Performance
decreases over time.

1. Carbon brushes worn or damaged.
2. Blade dull or damaged.

1. Have qualified technician replace brushes.
2. Keep blades sharp. Replace as needed.

Excessive noise
or rattling.

Internal damage or wear. (Carbon
brushes or bearings, for example.)

Have technician service tool.

Overheating.

1.  Forcing tool to work too fast.
2.  Blade misaligned.
3.  Blade dull or damaged.
4.  Blocked motor housing vents.

1.  Allow tool to work at its own rate.
2.  Check and correct blade to fence alignment.
3.  Keep blades sharp. Replace as needed.
4.  Wear ANSI-approved safety goggles and

NIOSH-approved dust mask/respirator while
blowing dust out of motor using compressed air.

Follow all safety precautions whenever diagnosing or servicing the tool.

Disconnect Battery pack and charger power supply before service.

Содержание 1772C-B

















Результаты поиска

Содержание 1772C-B

Отзывы:

Похожие инструкции для 1772C-B

Бренды по названию

Популярные бренды

Bauer 1772C-B, Инструкция по эксплуатации и правила безопасности

Результаты поиска

Содержание 1772C-B

Отзывы:

Похожие инструкции для 1772C-B

Бренды по названию

Популярные бренды