BaudTec RE300B1, Руководство пользователя

Страница: 88 / 96

11n Repeater User’s Manual
88
Diagnosing Problem using IP Utilities
ping
Ping is a command you can use to check whether your PC can
recognize other computers on your network and the Internet. A
ping command sends a message to the computer you specify. If
the computer receives the message, it sends messages in reply.
To use it, you must know the IP address of the computer with
which you are trying to communicate.
On Windows-based computers, you can execute a ping
command from the Start menu. Click the
Start button, and then
click Run . In the Open text box, type a statement such as the
following:
ping 10.0.0.2
Click OK . You can substitute any private IP address on your
LAN or a public IP address for an Internet site, if known.
If the target computer receives the message, a Command
Prompt window is displayed:
Figure 8: Using the ping Utility
If the target computer cannot be located, you will receive the
message
Request timed out .
Using the ping command, you can test whether the path to the
Wireless Gateway is working (using the preconfigured default
LAN IP address 10.0.0.2) or another address you assigned.
You can also test whether access to the Internet is working by
typing an external address, such as that for
www.yahoo.com
(216.115.108.243). If you do not know the IP address of a
particular Internet location, you can use the
nslookup command,
as explained in the following section.
From most other IP-enabled operating systems, you can
execute the same command at a command prompt or through a
system administration utility.
nslookup
You can use the nslookup command to determine the IP
address associated with an Internet site name. You specify the
common name, and the nslookup command looks up the name
in on your DNS server (usually located with your ISP). If that