Baudcom BD-OP-MUX32, Руководство пользователя

Страница: 20 / 32

32PCM voice multiplexer user manual
19
Console Interface
Console sets interface. When matching 4 Ethernet interfaces, VLAN isolation mode
can be set by Hyper Terminal.
This is for PC hyper-terminal control.
Use DB9 cable to connect the PC's COM port with CONSOLE port;
Run the "hyper terminal" program under WINDOWS system, or run other third-party
serial port connection software, set the default parameters as following:
Baud rate: 9600;
Data byte: 8;
parity check: none;
Stop bit: 1;
Flow control: none;
Press "ENTER" continuously for several times, enter system's CLI interface and
begin management work.
========================== Main Menu ========================
== 1.current Ethernet information, Please input '1' ===
== 2.current PDH & E1 information, Please input '2' ===
== 3.current Phone & AUX Port information,Please input '3'===
== 4.Enter config menu, Please input '4' ===
== 5.Language Switch(Chinese or English)!Please input '5' ===
== 6.Factory Reset!Please input '6' ===
=============================================================
[PDH /]:
Submenu introduction