2LAN+1POTS+WiFi Dual Mode HGU USER MANUAL
Website : www.baudcom.com.cn Tel: +86 21 37709251 Email:
Page 21
Band
Choose 2.4G WiFi band.
Mode
WLAN work mode, only supports AP mode.
Multiple AP
Configure multiple AP parameters.
SSID
SSID Name. It is used to distinguish from other WLAN.
Cancel Broadcast
Disable or Enable transmit broadcast in WLAN
Block Relay
Disable or Enable isolate WLAN clients
WMM
WiFi MultiMedia. Video and audio traffic will have higher priority
when WMM is enabled.
SGI
Short Guard Interval. The Guard Interval is used to ensure that
distinct transmissions occur between the successive data symbols
transmitted by a device. To increase data rates, the 802.11n
standard added optional support for a 400 nsec guard interval. This
would provide an 11% increase in data rates.
Power enhancing
Enhance power.
Power saving
Enable power saving.
Channel width
WLAN channel width.
Auto DFS enable
Enable auto DFS.
Channel Number
WLAN channel, default value is auto.
Radio power
Configure wifi transmit power.
Associated Clients
Show the active WLAN clients
Regdomain
Configure country or region.
3.3.6.2 WLAN advanced
These settings are only for more technically advanced users who have a sufficient knowledge
about WLAN. These settings should not be changed unless you know what effect the changes will
have on your Access Point.