GPON Repeater Operation Manual
Chapter 3 Hardware Installation
Copyright © 2018 Shanghai Baudcom Communication Device Co.,Ltd. All Rights Reserved.
12 / 18
Figure 0-4 Rack Tray Bracket
If the equipment is planned to be installed in a 19-inch cabinet, please choose tray bracket. It is
recommended that BD-2GPON-OEO be fixed on the tray bracket before the equipment is mounting.
As shown in the figure below, two screws are used to fix the BD-2GPON-OEO equipment from the
side to the tray bracket.
Figure 0-5 Install BD-2GPON-OEO on Tray Bracket
Use cabinet screws to fix the tray bracket on the slot of 1U height, as shown in the figure below. Then
complete the mounting of the equipment.
Figure 0-6 Install Tray Bracket in Cabinet
