Vaporbaby mod. 2010
1
2012
INSTRUCTIONS AND MAINTENANCE
VAPORBABY mod. 2010
Read the directions carefully before operating.
Don’t use the machine differently from following description
.
1.
SPECIFICATIONS
MODEL:
VAPORBABY mod. 2010
POWER SUPPLY:
230 V
–
50 Hz
TOTAL INSTALLED POWER:
1950 W
IRON POWER:
800 W
BOILER POWER:
1150 W
BOILER CAPACITY:
1,4 L.
IRONING ENDURANCE:
about 2 hours
OPERATING STEAM PRESSURE:
2,8 BAR
MAXIMUM PRESSURE:
5 BAR
WEIGHT:
7 kg
OVERALL DIMENSIONS:
27x35x22 h. cm
MADE IN ITALY
2.
IMPORTANT
Before installing VAPORBABY,
it is necessary to set up the
following facilities:
1.
electrical plug protected
and
suitable
to
VAPORBABY power (it is
better to use an earth
protector magneto-thermic
switch 16 A ld 30mA).
2.
a steady and plane surface
where to put the machine.
For the transport and the
displacement,
take
the
generator only by the handle,
never pull its electric wires.
3.
OPENING OF PACKAGE
1.
Open the box containing
VAPORBABY, take the
instructions manual and
read it carefully.
2.
Remove VAPORBABY from the box, mount the two pieces of the cable support and insert it
deep into the special support holder (fig. 1) placed on the back side of the generator.
3.
Fix iron cable to the support hook (avoid twining).
4.
Put the iron on its rubber iron rest (fig. 1).
5.
For VAPORBABY supplied with trolley: screw the trolley knob on the proper connection
under the base of the machine (fig. 2).
IRON REST
IRON
CABLE
HANDLE
SECURITY
VALVE PLUG
CABLE SUPPORT
HOOK FOR
CABLE SUPPORT
ELECTRIC CABLE
Fig. 1
