Battery Watering Technologies Direct Fill Link+, Руководство пользователя

Страница: 4 / 16

3
FLOW METER DISPLAY
All operations are revealed on the LCD screen using the large 6-characters in the
top row and smaller characters and symbols in the second row. These characters
and symbols indicate information regarding totals, flow, calibration, units of
measure and operational messages.
NOTE: The following sequence of displays will only show when replacing the
batteries. BWT recommends replacing the batteries annually.
GETTING STARTED
When batteries are initially installed or
replaced, the initialization routine will
start the LCD display blank, then display
“HELLO” on the top row and “Q9Disp” on the
information row for one second.
SOFTWARE VERSION
The LCD will then display “HELLO” on the
top row and “FW Vxx” on the information
row for one second. The Vxx will be the
version of the software installed on the
display. Example: “FW V03” indicates
firmware version 3 installed on the display.
DETECT BLUETOOTH
The LCD will then display the "Detect Blue T".
DIRECT FILL LINK+ ID NUMBER FOR
BLUETOOTH
The LCD will then display the Direct Fill Link+
ID on the information row every 10 seconds.
This ID # is needed to connect to the FRED
app.
NOTE: The ID number will only contain
characters 0-9 and A-F.