BPS
S
un
P
ower
S
olar
P
anel
Battery Power Solutions’ SunPower Solar Panel allows you to safely and efficiently charge the C-100 CPAP
Battery Pack using the power of the sun.
INSTRUCTIONS FOR CHARGING C-100 CPAP BATTERY PACK
Unzip the front pocket of the SunPower Solar Panel and gently pull out the connection cord to your desired length.
Please note that this cord is connected to the solar panels and does not disconnect from the panels.
Squeeze the quick release buckles and unfold the three solar panels with the solar cells facing outward.
Locate the connector tip labeled “N” from the tips included with the SunPower Solar Panel. Each connector tip
has a very small letter embossed on the top of the black plastic portion of the tip. Please note this letter can be
difficult to read but it is present.
Insert the “N” connector tip into the SunPower Solar Panel connection cord and then into the DC in jack of the
C-100 CPAP Battery Pack.
Place the SunPower Solar Panel facing toward direct sunlight to begin the charging process.
Optimal charging conditions include: direct sunlight with the panels angled toward the sun, no clouds, no
hanging branches or other obstructions to sunlight, no shade covering any of the panels, and no dirt or debris
on the solar cells.
To obtain maximum output, angle the panels toward direct sunlight and continue to adjust the placement of
the panels to track the sun’s movement throughout the day.
Avoid leaving the C-100 Battery Pack in direct sunlight during the charging process by covering it or placing
it in the shade of the angled panels.
When charging is complete disconnect the C-100 Battery Pack from the SunPower Solar Panel.
BATTERY POWER SOLUTIONS
CONNECTOR
TIP LETTER
CONNECTION
CORD
QUICK RELEASE
BUCKLE
“N”
CONNECTOR TIP
DC IN JACK
C-100 CPAP
BATTERY PACK
CONNECTION
CORD
SUNPOWER
SOLAR PANEL
