BPS Freedom 50
W
S
olar
P
anel
- 1 -
- 6 -
Water-Resistant
Low Profile Panels
Universal Connector
Tips with Output Cable
Quick Charge
3.0 USB Port
Great for cell
phones & tablets
Great for cell
- 1 -
TECHNICAL SPECIFICATIONS
Model #: SP50
Cell Type: Sunpower Solar Cells
Rated Wa age: 50W
Output Voltage: 13.2V
(nominal)
Quick Charge 3.0 USB Output Voltage: 5V | 2A
E
ffi
ciency Ra ng: 23.5%
Folded Dimensions:
11.5” x 6.75” x 2.5”
(L x H x W)
Open Dimensions:
27” x 23” x 0.125”
(L x H x W)
*without inside pocket
fl
ap open
Weight: 2.9 lbs.
Warranty: 1 year
Freedom 50W Solar Panel
Output Cable
Universal Connector Tips (set of 10)
Instruc on Manual
PACKAGE CONTENTS
PORTABLE ELECTRONIC DEVICE CHARGING
Is the Freedom 50W Solar Panel waterproof?
The solar panels themselves
are weather-resistant and will not be harmed if exposed to light rain or
snow; however, the built-in voltage controller box and the output cable are
not weather-resistant and must be kept dry.
Does the Freedom 50W Solar Panel hold a charge?
No.
The solar panels
only produce power when exposed to sunlight and that power is not stored
and must be transferred to an external ba ery source.
Can I leave the Freedom 50W Solar Panel outside for con
Ɵ
nual use?
No.
The solar panels are not designed for con nuous outdoor use. When not in
use wipe the panels with a clean, dry cloth and fold for storage.
Why is the Work Indicator light on when nothing is plugged into the
Freedom 50W Solar Panel?
The Work Indicator light displays when the solar
panels are exposed to any amount of UV rays and simply shows the voltage
control box is working.
FREQUENTLY ASKED QUESTIONS
Con
fi
rm the electronic device’s charging requirements are compa
Ɵ
ble with
the Freedom 50W Solar Panel speci
fi
ca
Ɵ
ons before use!
Unfold the Freedom 50W Solar Panel and angle it toward direct sunlight.
Open the inside
fl
ap pocket of the solar panel to reveal the voltage
controller box, output cable and ten (10) universal connector ps.
Choose one of the following op ons to begin the charging process:
Plug the device’s USB charging cable into the USB OUT port of the
voltage
controller
box.
If one of the provided connector ps
fi
ts the charging port of the
device plug either end of the output cable into the DC OUT port of
the voltage controller box. Plug the other end of the output cable
with
the
connector
p a ached into the charging port of the device.
