Battery Controller BC JUMPSTARTER SUPERCAP HYBRID 12V-3200A, Руководство пользователя

Страница: 3 / 5

The packaging of the product is recyclable. Do not dispose of electrical
appliances or batteries in household waste, but follow current regulations.
Supercapacitors are part of the RoHS directive for electrical equipment.
TROUBLESHOOTING
PROBLEM SOLUTION
The charger is connected to power outlet and
jump starter’s 12V socket, but the charger’s
red LED blinks slowly (Error: battery not
connected). Verify
that the jump starter’s 12V socket is working, by
connecting whatever 12V device (for example, a 12V
lamp).
The battery charger cannot complete the
charge.
The jump starter’s battery or supercapacitors might be
defective or the battery charger might be damaged.
Please try recharging another 12V battery with the
battery charger to verify whether the same problem
occurs.
The battery charger works perfectly and it
completes the charge, but no LED on the
jump starter turns on. The LED bar button might be damaged. Please verify
with a voltmeter on the jump starter’s clamps the battery
voltage / state of charge..
No LED on the jump starter turns on, but
when the battery charger is connected all
LED on the jump starter turn on. The internal battery is defective. To avoid damages to
the battery, always let it cool down for 3 minutes between
tho attempts to jump start a vehicle (see instructions
point 4).
The device is fully charged but it doesn’t
work.
Make sure the cables and clamps of the jump starters
are intact and that they are well connected to the poles
of the vehicle battery
. The vehicle’s battery might be
defective.
When a 12V accessory gets connected to
the 12V socket, a strange noise is heard. The 12V adapter of the connected device could be
defective, causing the switch to interrupt. The 12V device
could require too much current.
F.A.Q.
QUESTION ANSWER
How many jumpstarts can be done before to
recharge the jump starter? 1 to 30 jumpstarts, according to the temperature, the
vehicle’s conditions, the engine type and capacity.
Is it possible to replace the battery or the
jump starter’s supercapacitors? Please ask your Dealer for information.
Which is the best storing temperature and
operating temperature? Ambient temperature. The jump starter works between
-25°C and +40°C, but it can lose power below 0°C. High
temperatures bring to a faster discharge.
Can I use another battery charger to
recharge the device? No, use only the provided battery charger BC SMART
2000.
The jump starter is a fragile product? Yes, it is necessary to follow all instructions carefully.
TECHNICAL DATA & CONTACTS
Voltage 12 Volt
BC BATTERY CONTROLLER
CISLIANO (MI)
– ITALY
info@batterycontroller.it
Peak Current (PA) 3200 A
Cranking Current (CA) 1200 A
Battery Capacity 12V 12 Ah
Cables Section 25 mm2
Cables Length 120 cm
Embedded 12V Socket 15 A
Dimensions 275 x 145 x 330 mm
Weight 6.4 Kg
BC JUMPSTARTER SUPERCAP HYBRID 12V-3200A
USER’S MANUAL
1. LED bar button
2. LED bar showing the state of charge
3. 12V 15A socket
4. Rail for cable winding
5. Support for clamps
CONGRATULATIONS :
Thank you for purchasing BC JUMPSTARTER SUPERCAP HYBRID 12V-3200A, provided
with a sealed AGM battery and supercapacitor technology. Please always follow the basic
principles and precautions necessary when working near a 12V battery, read all the
instructions carefully and keep this user manual for reference. The device is designed
exclusively for starting 12V vehicles with a maximum capacity of 10000cc.
IMPORTANT NOTE: BEFORE FIRST USE, RECHARGE THE STARTER COMPLETELY
WITH THE CHARGER BC SMART 2000 SUPPLIED.
1
– SAFETY INSTRUCTIONS
1. Keep out of reach of children or persons with reduced physical/mental abilities or lack
of experience, unless under the supervision of a responsible person. The product is not
a toy.
2. Wear protective goggles and gloves during each use.
3. Use only the accessories supplied and recommended by the manufacturer, to avoid
any risk of damage to the product and to things or people in the vicinity of the product.
4. Never pull the supplied charger cables, even when disconnecting the plug from the
socket.
5. Do not charge the appliance with damaged accessories. In the event of damage or
failure of the supplied charger, request repair or replacement from the dealer.
6. The starter can be used in any weather conditions (rain, snow, hot or cold weather). Do
not recharge in a damp environment. Do not attempt to start a frozen battery. Do not
immerse the booster in water or liquids, do not expose to splashes.
7. Never put the red clamp in contact with the black clamp and do not place the two
clamps in contact with the same metal object, to avoid any risk of a short circuit.
8. To avoid any risk of short circuit and to protect the positive (red) and negative (black)
clamps, always hook the clamps to their supports when not in use. The appliance is
equipped with lateral rails for winding the cables.
9. Do not expose the device to flames or sources of heat. Do not smoke when using it. Do
not use in the presence of flammable or explosive liquids, gases or dust. Use in
ventilated environments.
10. In the event of faults or failures, do not attempt to repair the jump starter, but always
contact your dealer. Any tampering or attempted repair in autonomy will result in the
invalidity of the warranty.
11. Never allow the jump starter to discharge completely and charge it periodically.
Damages caused by a deep discharge may be irreversible.
IMPORTANT: when the jump starter is not used, we recommend to keep it always
connected to the provided charger, or at least to recharge it once every 3 months.
1
2
3
4 4
5 5
1
4