Battenfeld 222905, Руководство пользователя

Страница: 6 / 8

6
MOUNTING
TO FASTEN VAULT:
1. Find a location where it will be convenient to mount
and store the vault. Be sure to leave adequate room
for the vault lid to hinge open.
2. Remove the foam from the bottom
of the vault, and use a pencil to mark
the 4 mounting holes on the
mounting surface.
Always fasten the vault to a secure object before use.
3. Move the vault, and pre-drill the 4 marked holes for the mounting screws.
• For hard woods, use a 5/32” drill bit.
• For soft woods, use a 9/64” drill bit.
Hinge
space
4 mounting holes
4 Included fender
washers and wood screws
4. Place vault over pre-drilled holes, and
fasten vault down using the 4 included
fender washers and wood screws.
5. Replace the foam in the bottom of the vault.
(Bottom of vault)