15
14
Pro
Pro
If the assistance level is set to ZERO (one bar
flashing), then the motor will not be turned on. Your
BATRIBIKE will now act and feel like a normal bicycle.
This is useful when you are feeling fit at the start of a
journey or using your bike for exercise purposes.
Power is still only a button press away.
No Assistance - Normal Pedal Bicycle
To activate the throttle, repeatedly
press the UP button, continuing
through the levels until the throttle
symbol is displayed after level 5. In
this mode the thumb throttle on the
left handlebar is now live. In all
other assistance levels the throttle is not functional.
You can still pedal the bike but power will not be applied until the
throttle is activated. To activate, push the thumb lever downwards.
Use the throttle control gently. A small push will apply a small
amount of power. Pushing more will increase the power until the
control is fully rotated, at which point full motor power is applied.
Throttle assistance can also be used without pedalling.
A handy way to use the throttle is to pull away from junctions, or
when starting on inclines as the rider will pull away easier and is
less likely to wobble.
To exit throttle mode and
return to pedal assist mode,
simply press the down button.
Using the Throttle - Country Specific
PLEASE NOTE:
The throttle control is not activated for some countries due to legal
restrictions. Please refer to your dealer for help and advice.
BS EN15194 Compliance
The
BATRIBIKE
Pro range is compliant with BS EN15194.
For the British market, the addition of a throttle control has
rendered this not compliant in some countries.
●
You are recommended to seek advice from the relevant
authorities in the country you are visiting before travelling.
REPEAT
19
18
Pro
Pro
STANDARD BICYCLE FUNCTIONS
Gears
The
DIAMOND Pro and GRANITE Pro
are provided with 7
speed Shimano Altus gears. To change gear you use the right
handlebar mounted Quick Shift selectors.
Gear number 1 is low for hills and rough
terrain and gear 7 is high for normal road use.
An indicator window shows the selected gear.
To increase the gear simply pull/squeeze the
upper lever with your right index finger.
To decrease the gear push the lower lever
away from you with your thumb.
You must be pedalling forwards as you
change gears.
Lights
Lights are provided on your
BATRIBIKE
bicycle. These are power efficient LED
units which are powered from the main
battery.
To turn on the front and rear lights, ensure
that the power is on and momentarily press the POWER button.
The Lights
icon will
show on the
display.
Braking
To stop, release the throttle and pull the brake
levers. The brake icon will be shown on the
handlebar mounted display.
Bell
A bell is incorporated into the left hand (rear)
brake lever. It is designed to be operated with
the left index finger.
Side Stand
To put the bicycle on its stand:-
1) While holding the bicycle
upright, push the stand downwards to its full extent.
2) Lean the bicycle over onto the stand.
Do not sit on the bicycle whilst the stand is down. It is
designed to take the weight of the bicycle and not the
additional weight of the rider.
Luggage Rack
The luggage rack provided is designed to carry a maximum
load of 25kg. Make sure that any items carried are securely
strapped and nothing is able to get caught in the rear wheel.
All other operation of your
BATRIBIKE
Electric Bicycle is as per
a normal pedal cycle.
PUSH to
change DOWN
SQUEEZE to
change UP
BELL
lever
FRONT & REAR LIGHTS
WITH BUILT IN REFLECTORS
