Batribike Diamond Granite XL, Руководство пользователя

Страница: 22 / 36

22
Quick Release fittings for Seat Height Adjustment
With the locking lever in the loose position, tighten the nut until finger tight. The
final tightening is done by moving the lever to the locked position. To undo move
the lever to the loose position to enable height adjustment.
Loose Locked
Adjusting the Handlebars
The handlebars can be adjusted for height
and angle to suit the rider. Hex keys, (not
supplied), will be required to carry out
these adjustments.
Adjust the height by loosening ' A ' and
pulling the handlebar stem upwards. Take
care not to exceed the limit marked on the
stem.
Adjust the rake angle by loosening ' B '
and gently moving the bars to the
required angle.
Adjust the bar rotation angle by
loosening with the two '
C ' bolts shown.
Items shown as ' D ' should not need adjustment.
Ensure all bolts are secured properly after adjustment. If in doubt, refer to
your dealer.
VIEW FROM ABOVE VIEW FROM BELOW
D
B
A
C
A
D
B
HEIGHT
ADJUSTMENT
RAKE ANGLE
ADJUSTMENT