71
Only for variant Meli94H/V: Support arm b) only for worktop b).
The worktop b) must be positioned for the large wheel or roller set.
Mounting the worktop a) on the support arm a) VARIANT Meli94H/V
Tool a) is available in the variants small, large and inclinable.
The small and large worktops are mounted in the same way on support arm a).
Loosen the two cylinder head screws on the underside of the support arm a) and
slide the slot of the worktop over the cylinder head screws. Maintain a maximum
distance of 2 mm between the worktop and the abrasive belt so that the risk of
objects being trapped is kept to a minimum. Tighten the two cylinder head screws.
Check whether the worktop is firmly connected to the support arm a).
The inclinable worktop is mounted on the side of the support arm a) in the same
way with 2 fixed openings.
Figure 45 Work plate a) small, large and inclinable and support arm a).
1) Insert the worktop into the base.
2) Cylinder head screws