background image

6

Operation

The fan is rated for connection to single-phase AC220-240 V / 50/60 Hz power 

mains. The fan is designed for continuous operation always connected to mains 

power. Air motion direction in the system must match the pointer on the fan 

casing. Ingress protection rating IPX4.

Maintenance

• 

Fan maintenance is to be performed only after the fan is disconnected from the 

mains power suppy. Maintenance means periodic cleaning of the surface of 

dust and dirt.

• 

All surfaces should be cleaned with diluted detergent, i.e. washing up liquid, 

and a soft cloth. Scourers and scouring agents should not be used, as these may 

cause damage to the surface of the product.

• 

Avoid water dripping on the electric components. Wipe the surfaces dry after 

cleaning.

 Waste Electrical & Electronic Equipment Regulations (WEEE)

Requires that any of our products showing this mark (left) must not be disposed of with other 

household or commercial waste. Bathstore does not levy any WEEE disposal charges to its 

customers for affected WEEE related products. To prevent possible harm to the environment or 

human health from uncontrolled waste disposal, please separate any such product from other 

waste types and recycle it responsibly at your local facilities. Check with your Local Authority, 

Recycling Center or retailer for recycling advice.

Содержание 41800041570









Отзывы: