INSTALLATION INSTRUCTIONS
6
Step 5
Attach a couple of batons to the back of
the unit to bridge the gap to the wall, it is
recommended this is done behind the
loose shelf.
Drill holes in the back of the unit using a
suitable size drill bit, making sure it goes
through the batons.
Place the unit in the required location
and mark out eh positions for drilling.
Using a suitable size drill bit, drill out the
positions and insert wall plugs (not
supplied).
Attach unit to wall using suitable wall
fixings (not supplied).
Step 6
Reattach the door to the unit.
Line up the hinge with the holes in the leg
and screw into place.
