Batca LD-3, Руководство пользователя, Страница: 15 / 23

www.batcafitness.com
15
LD-3 Owner’s Manual
All Flat Washers and Nylocks are 3/8” unless
otherwise noted
.
Step 8: This Step continued on next page
Item # Part # Description Qty
34 CAB-15004
Free Floater to Leg Press Cable
1
28 BFM-50345 Pulley Cover 1
39 BFH-50174 4 1/2” Pulley 1
48 BFP-51759 SHCS 3/8” x 2” 1
59 BFH-50146 3/8” Flat Washer 2
60 BFH-50157 3/8” Nylock 1
Figure 8
Note: The threaded bolt on
the end of the cable must
be threaded at least 1/2”
in the Free Floater. The
bolt must also be secured
with a 1/2” Jam Nut to
ensure a safe and proper
connection.
CAB-15004
141 1/4”

Position the cable guard tab on the Pulley Cover so
that the tab prevents the cable from coming out of
it’s track on the 4 1/2” Pulley. An example of this
positioning can be seen in the figure to the left. The
cable guard tab should be positioned so that it is in
the middle of the cable wrap on the 4 1/2” Pulley,
between points “A” and “B”. This will allow better
protection and prevent the cable from rubbing the
cable guard tab. Refer to Step 7 and 7a.
Pulley Cover
BFM-50345