Batca LD-2, Руководство пользователя

Страница: 10 / 23

Batca Fitness Systems
10
LD-2 Owner's Manual
Step 3:
Figure 3
All Flat Washers and Nylocks are 3/8”
unless otherwise noted. Anywhere a
washer is against the round side of a
tube there is to be a
3/8” CURVED
WASHER instead of a 3/8” FLAT
WASHER.
Item # Part # Description Qty
5 BFP-10843 Mid Row/Lat Pull Top 1
6 BFP-51767 Curved Anti-Deflection Plate 1
7 BFP-10849 Guide Rod Plate 1
8 BFP-51745 Guide Rod 2
9 BFP-53259 Guide Rod Sleeve 2
10 BFM-10413 Top Weight Plate 1
11 BFM-50632 Weight Stack Plate 19
12 BFM-50529 Rubber Donut 2
25 BFM-51173 Weight Stack Pull Pin 1
44 BFP-51760 SHCS 3/8” x 3 1/2” 2
45 BFP-51799 SHCS 3/8” x 5” 2
46 BFP-51756 SHCS 3/8” x 5 1/4” 2
48 BFH-50204 3/8” Curved Washer 8
49 BFH-50146 3/8” Flat Washer 4
50 BFH-50157 3/8” Nylock 6
Make sure all bolts are
tightened before moving
on
Make sure
the two
screws in the Guide
Rod Sleeves are
facing towards the
front of the weight
stack and the sleeve is
pushed up against the
rubber grommet of the
Guide Rod Plate. Once
it is in place tighten
the screws to keep it in
place.