English
14
Original instructions
MAINTENANCE AND CLEANING
Maintenance
There are no inner parts of the tool which need maintenance
Cleaning
• Keep safety devices, ventilation openings and the motor
housing as free as possible from dirt and dust Rub the elec-
tric power tool with a clean cloth or blow over it with low
pressure compressed air
• We recommend that you clean your electric power tool
immediately after each use
• Clean the electric power tool regularly with a damp cloth and
somewhat soft soap Do not use any cleaning or solvent
materials; these can attack the device’s plastic components
Make sure that no water can get inside the electric power
tool
TECHNICAL DATA
Speed 105 min
-1
Weight 53 5 g
Battery
320 mAh
Rated Voltage 3 7 V
⎓
Charging Time 1 h
Charger
Input 5 V
⎓
, 500 mA
Output 5 V
⎓
, 500 mA
Protection Class III
NOISE/VIBRATION INFORMATION
Sound emission values determined according to EN 60745-2-2
Typically the A-weighted sound pressure level of the product is
less than 70 dB(A) Uncertainty K =3 dB
The noise level when working can exceed 80 dB(A)
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K
determined according to EN 60745:
Screwdriving without impact: ah<2 5m/s
2
, K=1 5m/s
2
The
vibration level given in this information sheet has been measured
in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another It may be used
for a preliminary assessment of exposure The declared vibration
emission level represents the main applications of the tool
However if the tool is used for different applications, with different
accessories or insertion tools or is poorly maintained, the
vibration emission may differ This may significantly increase the
exposure level over the total working period An estimation of the
level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not
actually doing the job This may significantly reduce the exposure
level over the total working period Identify additional safety
measures to protect the operator from the effects of vibration
such as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns
7062541_WowStick-Ma-#1604-07.indb 14
22-04-16 08:55
