socket outlets, it should be cut off and an
appropriate plug fitted in its place by an
authorised customer service agent. The
replacement plug should have the same
fuse rating as the original plug. The severed
plug must be disposed of to avoid a possible
shock hazard and should never be inserted
into a mains socket elsewhere.
Save these instructions.
Refer to them
frequently and use them to instruct others
who may use this tool. If you loan someone
this tool, loan them these instructions also to
prevent misuse of the product and possible
injury.
The appliance is not intended for
use by young children or infirm
persons without supervision. Young
children should be supervised to
ensure that they do not play with
the appliance.
Use protective equipment!
INTENDED USE
• The mini reciprocating saw has been
exclusively designed for cutting wood,
chipboard, plastics, PVC, fibreglass,
drywall, sheet steel, iron, Aluminium and
other soft materials.
• The intended use also includes an
operation following the operating
instructions.
• Any use beyond these parameters
(different media, applying force) or any
changes (reconstruction, no original
accessory) can lead to serious risks and is
regarded as use that is contrary to the
intended purpose.
BEFORE FIRST USE
• Remove the mini reciprocating saw and the
accessory from the packaging.
• Check all parts for damage in transit and do
not use damaged accessory or a damaged
tool.
• Keep packaging materials out of reach of
children. There is risk of suffocation!
INSTALLING/REPLACING THE SAW
BLADE
Before installing or replacing the saw blade,
make sure the mini reciprocating saw is not
plugged in. Only use suitable saw blades and
do not use blunt, damaged or bent saw
blades. When replacing the saw blade wear
safety gloves to protect your hands.
1. Turn the ring of the quick change chuck (3)
counter clockwise for ¼ turn to release the
chuck. Hold the ring and then pull out the
saw blade from the quick change chuck.
2. Turn the ring of the quick change chuck (3)
counter clockwise for ¼ turn. Hold the ring
in this position and insert the new saw
blade with the cutting side downwards as
far as it will go. Then release the ring. The
saw blade is securely fastened by the quick
change chuck.
3. Carefully pull the saw blade to make sure
the saw blade is firmly secured. Ensure the
saw blade can move freely in the saw blade
guide (4).
Attention:
Due to friction the saw blade will
become very hot during cutting. When
removing the saw blade protect your hands
with safety gloves.
14
TM
7061234 Ma # 1112-16.indd 14
16-12-11 13:31
