9
Toll Free: 800.997.4467|
alignmentsupplies.com
Three Target Laser Alignment Method:
Although n o t as fast or accurate as the “Fast Cross-Firing Method” at times it may not be
possible to use a B.A.T. laser e mit t e r on both sheaves, in this case it may be necessary to use
the three p r o v id e d “puck” targets.
1. Magnetically affix one B.A.T. laser module to one sheave, with the laser e mi tt e r
pointing a t the opposing sheave.
2. Place the three GlowLine® “puck” targets on the opposing pulley/sheave 90
degrees apart on the pulley/sheave face.
3. Turn the laser module on by turning the battery knob clockwise. The Green laser
should now be visible on the GlowLine® Targets.
4. Align sheaves using the lasers a nd targets. The green line laser should be visible on
the opposing GlowLine™ Targets. Observe target faces to confirm the angular
misalignment.
5. Make corrections by moving the moveable pulley system so the laser falls onto
the white middle target line of all three GlowLine® puck targets.
6
. CAUTION! REMOVE B.A.T. LASERS and TARGETS BEFORE ENERGIZING
MACHINERY!
