Bastl Instruments Timber, Инструкция по сборке

Страница: 4 / 29

4 560pF ceramic capacitor
2 10uF electrolytic condensator
1 16 pin DIL DIL socket - in foam
3 14 pin DIL DIL socket - in foam
3 TL074P IC in foam
1 V2164 IC in foam
1 17 pin female header
2 100mA fuse
1 2 pin male header
1 2x5 pin double male header
ASSEMBLY
1 M3 x 11mm spacer nut x nut
1 M3 x 11,5mm spacer nut x screw
9 jack washers
9 jack nuts
2 M3 x 6mm screw
2 M3 x 8mm panel screw + washers
3 jumper
1 allen key
1 TOP PCB
1 BOTTOM PCB
1 front panel
1 power cable 10-16pin
3 knob
BEFORE STARTING THE KIT...
Before starting this kit, prepare the following tools:
● Soldering iron
● Multi-meter
● Flush cutters
● Smaller pliers
● n2. hex screwdriver or allen key (enclosed with kit)
● Phillips screwdriver
● Wrench No. 8
● Protective eyewear
● Isopropyl a smaller and clean brush (optional)
We suggest that you work in a clean and a well lit and ventilated environment to avoid accidents or
losing any of the small components. Also briefly go through this guide and make sure that you
understand all the steps before you start soldering.
4