STEP #7
FULL SIZE BED INSTRUCTIONS
Full size bed rails (x 1 pair) (Sold separately)
Page 16 of 16
Hardware needed for Step #7:
(AA) Allen wrench (1 piece)
(EE) Filler bolts (x 4 pieces)
IMPORTANT: Store away all extra parts to this “crib”, “toddler bed”, that you are
not using for possible future use, as you may wish to convert again. Always store
the assembly directions in the pouch attached to the mattress support.
Note: (EE) Filler bolts & Hardware
included with bed rails
From the crib, detach all bolts from the footboard. Then detach all bolts from the headboard. Insert (2) (EE) filler bolts in
top holes of headboard & footboard & tighten to snug fit. To attach bed rail, insert (2) machine bolts with lock washer &
flat washer through holes in side rails into bushings in headboard and tighten with allen wrench. Repeat this procedure
on all four areas for proper full-size bed hook-up.
(EE)
Side rail
Slat
Slat
Slat
Allen wrench
Flat washer
Machine bolt
Lock washer
Bushings in
headboard
Detail A
A
(EE)
(EE)
(EE)
Side rail
