Weight Inches Per
Gear
Max Drag
Line Cap.
Model
Bearings (oz.)
Turn (in.)
Ratio
(lbs.) mono/
braid
(lbs./yds.)
SBS-10
6
8.8
21
5.1:1
5.5
4/185; 6/150; 8/130
10/200; 15/135;20/115
Congratulations on your purchase of a Slab Shooter Spinning Reel! This reel is
manufactured with the highest quality components and has been extensively
tested to ensure that your day on the water is more productive. Please take a
moment to familiarize yourself with the integrated performance-enhancing
features of this reel before use. This will help you to optimize the reel's
settings and even further increase your fishing success. We wish you the best
of luck in your future angling adventures!
Graphite Frame and Rotor
The frame and rotor were designed to be lightweight, durable, and
corrosion-resistant.
Powerlock™ Instant Anti-Reverse
Your reel is equipped with our Powerlock instant anti-reverse system. This is a
special type of bearing that allows the handle to only turn forward. There is no
play in the handle, so you have complete control during the retrieve and no
“loose” feeling, which is important during stop-and-go retrieves.
Double-Anodized-Aluminum Spool
The spool has been double-anodized to provide years of corrosion resistance.
Soft Touch PVC Handle Knob
Soft Touch PVC handle knob are comfortable, lightweight, and provide a
non-slip surface when wet.
Front Drag
Your reel is equipped with a drag system to help you fight stronger, faster fish
without the risk of breaking your line. The drag can be adjusted by turning the
knob on the front side or spool end of the reel. To properly set the drag, you
will need a spring scale. Your drag should be set at 25% of the test rating of
your line. Tie a loop in the end of your main line. Run it though the guides of
your rod and attach it to the hook on the scale. Pull the scale until it registers
25% of the line rating. If you are using 6 lb. test, then you should set your drag
to start slipping at 1.5 lbs.
Care and Lubrication
Your new reel is designed to provide years of dependable service. But like any
other precision machine, periodic cleaning and maintenance is required for
continued peak performance.
Reels made today require both a lightweight oil and grease. Oil and grease
should be used sparingly; too much can have a negative impact on reel
performance. There are lightweight oils and greases made specifically for
fishing reels that can be found at basspro.com
As a rule of thumb, oils should be used to lubricate any moving part on the
reel, e.g. ball bearings, bushings, handle joints, bail springs, etc. Grease
should be used to lubricate the main drive gear and pinion gear.
We do not recommend using any multipurpose oils. Many of these oils have
properties that will attract dirt and dust to the internal parts. This may cause
excessive wear and reduce the life of the reel.
After each trip, the reel should be checked for dirt or sand. If it has been
exposed to saltwater, the spool should be removed and the entire reel rinsed in
freshwater. Dry with a soft cloth and lubricate the reel as described above.
Bass Pro Shops
®
Limited Warranty
Bass Pro Shops will repair or replace (at our discretion) any Bass Pro Shops
Fishing Reel which proves to be defective in workmanship or materials within
one year from the original date of purchase. You must save your dated sales
receipt for warranty validation. This warranty gives you specific legal rights,
and you may have other rights which vary from state to state or province to
province.
For Reels purchased through Bass Pro Shops catalogs or Bass Pro Shops
online:
•
For reel replacement only:
Return your reel postage prepaid with your
dated sales receipt to the Return Center address listed on your receipt.
•
For reel repair only:
Return your reel postage prepaid with a copy of your
dated sales receipt as proof of purchase and warranty validation to the
Outdoor World Rod & Reel Repair address below.
For Reels purchased through Bass Pro Shops retail locations:
•
For reel replacement only:
Return your reel (postage prepaid if sending by
mail) along with your dated sales receipt to the store from which it was
purchased.
•
For reel repair only:
Return your reel postage prepaid with a copy of your
dated sales receipt as proof of purchase and warranty validation to the
Outdoor World Rod & Reel Repair address below.
Outdoor World Rod & Reel Repair
2300 E. Turner, Suite M
Springfield, MO 65803
This warranty does not cover lost parts, malfunctions, or damage due to
abuse, accidents, or normal wear. Failure to clean, lubricate, and provide
reasonable and necessary maintenance will void the warranty. Repairs needed
to your reel due to abnormal use or modification, or after warranty expiration,
are available for a reasonable charge from Outdoor World Rod & Reel Repair,
providing the combo is returned postage paid.
Except to the extent prohibited by applicable law, there are no warranties or
conditions, express or implied, other than those expressly set out herein. Bass
Pro Shops shall not, under any circumstances, be liable for an amount greater
than the actual purchase price of the product nor for any special, incidental, or
consequential damages suffered or incurred in connection with the product and
Bass Pro Shops does not assume, and does not authorize any person to assume
for it, any obligation or liability other than those expressly set out herein.
For professional cleaning and maintenance,
send your reel postage prepaid to:
Outdoor World Rod & Reel Repair
2300 E. Turner, Suite M
Springfield, MO 65803
Phone: (417) 873-5274 Fax: (417) 873-5280
Made in China.
SLAB SHOOTER SPINNING REEL — SBS-10
SBS-10 SPINNING REEL
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
NO.
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
PARTS NAME
FRONT DRAG SET
STOPPER SPRING
KEY WASHER×2
DRAG WASHER ×3
EARED WASHER
SPOOL
LINE KEEPER
LINE KEEPER SCREW
CLICK WASHER
CLICK GEAR
CLICKER
SPOOL SHORT SCREW ×2
SCREW
NUT
ROTOR FIX HOLDER
ROTOR
BAIL HOLDER
BAIL HOLDER & ARM ...
BAIL HOLDER CAP
CAP SCREW ×2
LINE ROLLER SCREW
ARM LEVER
PARTS NAME
WASHER
LINE ROLLER
BUSHING
BAIL ARM SET
ARM LEVER SHAFT
SPRING
KICK LEVER
ARM LEVER CAP
MAIN SHAFT
BALL BEARING FIX HOLDER
BALL BEARING
BALL BEARING KEEPER
INNER RING
ONE-WAY CLUTCH
ONE-WAY CLUTCH SPRING
SHAFT BALL BEARING
PINION GEAR
SHAFT BALL BEARING SCREW ×3
ANTI-REVERSE SPRING
ANTI-REVERSE SWITCH
ANTI-REVERSE SHAFT
ANTI-REVERSE SCREW
PARTS NAME
BODY BALL BEARING
MAIN GEAR
GEAR WASHER
BODY COVER BALL BEARING
BODY COVER
BODY COVER SCREW ×2
BODY COVER SCREW
BODY COVER SHORT SCREW
HANDLE SET
OSCILLATING GEAR
SLIDER
SLIDER SCREW
HANDLE ARM CAP
WASHER
BODY
BALANCE SLIDER SCREW
BALANCE SLIDER
BODY CAP
CAP SCREW
BALL BEARING (1)
NO.
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
BP151184
