B
I
C
E
D
4. Locate the rod support cross piece (C), 2 screws (E), and 2 screw receivers (F). Using the same upright
piece from step 1, orient part C so the side with no holes is angled outward away from the logo and the
4 screw receiver holes are on the back side. Insert 2 screw receivers into the holes oriented toward the
end that matches the upright connection with part D. Make sure that the threaded openings in the
receivers are aligned with the hole exiting the end of the piece. Find the correct corresponding holes on
the upright piece, indicated in the image. Insert screws through the holes on the upright, then into the
end holes of part C so that the screws can be threaded into the screw receivers. Use the screwdriver to
tighten the screw snugly.
back view
F
E
F
仅供观看
(only
for
viewing)
勿打印
(do
not
print)
