9137200997 Rev D
BE1-51 Introduction
iii
REVISION HISTORY
The following information provides a historical summary of the changes made to the BE1-51 instruction
manual (9137200997). Revisions are listed in reverse chronological order.
Manual
Revision and Date
Change
D, 08/07
•
Updated
Output Contacts
ratings in Section 1.
•
Moved content of Section 6,
Maintenance
to Section 4.
•
Updated front panel illustrations to show laser graphics.
•
Moved content of Section 7,
Manual Change Information
to manual
introduction.
•
Added manual part number and revision to all footers.
•
Updated cover drawings.
•
Moved
Time Overcurrent Characteristic Curves
from Section 1 to new
Appendix A
.
•
Updated power supply burden data in Section 1.
•
Updated Target Indicator description in Section 3.
C, 01/98
•
Changed paragraph styles to new manual design.
•
Added Note 3 to Figure 1-1.
•
Corrected inductive output specification from 0.1 to 0.3 A.
•
Changed TOC specification.
•
Added instantaneous response time with graph 1-1.
•
Deleted specification reference to field selectable switch in Type S
power supply.
•
Corrected weight in kilograms for all case styles.
•
Replaced Figure 1-49 with correct curve.
•
Corrected Figure 1-51.
•
Added multiturn potentiometer description to controls in Table 2-1.
•
Corrected Range 9 entries in Table 2-2.
•
Changed “Element D” in Table 2-4 to “Element N”.
•
Deleted Figure 3-1.
•
Revised the power supply functional description to accommodate new
wide range power supplies.
•
Corrected Figures 4-2, 4-3, and 4-4.
•
Deleted Figure 4-5.
B, 09/93
•
Added Figures 4-4 and 4-6 through 4-9.
•
Restructured
Section
5,
Operational Test.
•
Corrected minor typographical errors.
A, 02/93
•
Added characteristic curves for integrating algorithm, Figures 1-39
through 1-70.
•
Changed Figure 1-2.
•
Corrected minor discrepancies.
—, 07/92
•
Initial
release