BASKETBALL PROBASE probase01, Руководство по установке

Страница: 8 / 13

- 8 -
INSTALLATION GUIDE
6
PREPARING THE TAPPING
BLOCK (plastic or wood)
Place the tapping block (G) inside
the pivot base (D).
Insert the tapping block holder (H)
into the grooves of the tapping
block and push them between the
bolts to the base of the tapping
block.
6.1 6.2 6.3
7
PUSH DOWN THE STAKE
Lower the assembled stake into
the pilot hole.
Push down the stake by hitting
on the tapping block (G) with a
sledgehammer of 10 lbs or more.
The stake should pushed down in
the ground as straight as possible.
If it is not perfectly straight ,
don’t worry, the final levelling of
the upper part of the Probase will
be done at step 13.
7.1
Push the stake into the ground until
the base of the pivot is even with
the ground .
***IMPORTANT***
The base absolutely has to be
even with the ground .
(See arrow on photo 7.2).
7.2