STEP 4
Finding lost items
STEP 5
Attaching
EZ
-FIND!
®
Tags
1.Turn
EZ
-FIND!
®
Transmitter ON
by pressing the
FIND button for
1 –2 seconds.
2.Press FIND
again to view
menu.
3. Scroll up
or down to
item you
want to
locate and
press the
FIND button.
The tagged
item will beep
if it is in range.
Adhesive strips are best
used on a flat surface.
Remove Paper cover from
one side of the double
sided adhesive strips.
Place sticky side in center
of the recessed cavity of
an
EZ
-FIND!
®
slim tag.
Press firmly. Let it set for
15 minutes (ideally for 24
hours) before using
tracked items.
Push the key
ring loop
through the
hole of the
vertical post
extended from
the mini-tag.
Notes:
If no beep is heard once the
FIND button is pressed, then
walk around with the
transmitter while continuously
pressing the FIND button until
the item is located. If the lost
item cannot be located it
may be due to
• lost item out of range
• Incorrect menu was pressed
• The tag has weak batteries
• The transmitter has weak
batteries
The Transmitter will
automatically turn off after 2
minutes.
6
7
Adhesive strips and key rings are available to attach EZ-FIND! tags to
items you wish to keep track of. Adhesive strips and key rings are included
in the starter kit.
Notes:
Tag number labels are included in this package. You may want to place a number
label on each tag to keep track of the tags that you have programmed into the
EZ-FIND! transmitter.
EZFindInstBookletFinal_2:Layout 1 1/23/13 1:35 AM Page 9
