Security ON/OFF
IP camera settings
There is from 1 to 8 IP cameras available
for display.
Select a camera in the list
by
scrolling through
the list and clicking
on the camera name.
Stop button
Play button
Zone settings
•
№:
Number of the sensor.
•
Type:
Type o the sensor.
Normal mode
- the sensor is activated only when the system
is armed and if this sensor is selected in the paragraph above.
Usually this type is used for door and window sensors.
Emergency and 24 hours
- is active constantly.
These types can be selected when flood sensors, gas, volume,
smoke and heating are connected to the loops.
•
Mode:
Mode of the sensor.
It depends on the sensor used.
•
3C
- activation is performed when switching position
NO
- normally open sensor, activation is performed when
•
the contacts are closed
NC
- normally closed sensor, activation is performed when
•
the contacts open
Bell
- doorbell connection mode. When the contacts are
•
closed, the monitor will start playing the incoming call melody.
•
Delay:
Delay before activating a specific sensor.
•
Sensor:
Selects the display type of the sensor
for additional informativity when triggered.
Display during an alarm
By setting the required value for the
connected sensor, the sensor number
and its name will be displayed on the
monitor when the alarm is triggered.
Display
with zone settings
Main security display
To disable alarm you need to enter password.
By default, password is
1234
.
