RoamerTime
User Manual
© The Basic Roamer Company. All rights reserved.
www.thebasicroamer.co.uk
Page 4 of 4
Version 1.02 - Revision 0
T
has different effects depending on how long it is pressed for:
a short press changes the display mode, in the sequence:
o
clock and stopwatch displayed
o
clock only displayed
o
stopwatch only displayed
a medium press (more than 2 seconds) allows the display brightness to be changed -
use
B
to increase the brightness from 0 (min) to 15 (max) one step at a time, or hold
down to continuously change the brightness
a long press (more than 5 seconds) will allow the clock to be set. Initially the hh
value will flash - use
B
(one press at a time or hold down) to increment hh. Press
T
to
flash the mm value - use
B
(one press at a time or hold down) to increment mm.
Press
T
to flash the ss value - use
B
(one press at a time or hold down) to increment
ss. Press
T
again to set the clock to the displayed value. Note that the clock stops to
allow accurate setting when
B
is used to change the hh, mm or ss values.
B
controls the stopwatch (or is used for setting the brightness and clock - see above):
a short press will start the stopwatch
the next short press will pause the stopwatch display (although the stopwatch will
continue running in the background)
the next short press will restart the stopwatch display, with the displayed value
resuming at the time that the stopwatch has now reached
a medium press will reset the stopwatch to zero.
O
O
p
p
t
t
i
i
o
o
n
n
a
a
l
l
R
R
e
e
m
m
o
o
t
t
e
e
U
U
n
n
i
i
t
t
The optional remote unit connects to the
RoamerTime
via
the socket on the left hand side.
There are two buttons on the remote unit:
The black button at the top provides exactly the
same functions as the
T
button
The red button at the bottom provides exactly the
same functions as the
B
button.
