MATTRESS RETAINER INSTALLATION
1. The Slide-W-I-D-E Expandable/Retractable Sleep Deck features two sets of Mattress Retainers
that are positioned at bed head and foot corners.
2. To install, position the mattress retainers above the sleep deck corners with ends perpendicular to
the sleep deck surface and long crooked bent ends on outside as shown below.
3. Insert the rod ends into the appropriate 80" or 76" bed length holes as shown in detail at bottom
right.
4. Once both ends are engaged, tilt each retainer toward the corner so that the retainer elbows rest
on the deck.
IMPORTANT
MATTRESS RETAINERS MUST MATCH
HEADBOARD, FOOTBOARD, AND
WALLSAVER POSITIONS. SEE EACH
BED MODEL’S SERVICE MANUAL.
To attach the four Mattress Retainers,
insert Retainer ends into sleep deck
corner holes, then tilt Retainers down
toward corners
Outside corner
holes used for
80" bed position
Holes used for
76” bed position
NOTE: CROOKED
END IS ALWAYS
ON OUTSIDE
When in final position,
all retainer elbows rest
on sleep deck surface
Left Foot Corner
Mattress Retainer
999-0881-001
HEAD END
FOOT END
Right Foot Corner
Mattress Retainer
999-0881-002
Left Head Corner
Mattress Retainer
999-0881-002
Right Head Corner
Mattress Retainer
999-0881-001
GF Health Products, Inc. - www.grahamfield.com
Slide-W-I-D-E Expandable/Retractable Sleep Deck Supplement 999-0881-190G
ZENITH SERIES
6