8
IO.KAP-03.02
(ENG)
9.2 COMMUNICATOR’S OPTIONS.
1) Contrast
Contrast adjustment is performed by means of the F2 [ + ] and F1 [ - ] keys.
Pressing the F3 key [ >|< ] causes a return to the factory settings.
Resetting the Communicator does not change performed contrast adjustments.
2) Info
In the tag "INFO" incorporates the following information about the Communicator:
−
Software version
−
The Communicator’s electronics version
−
Loader’s version
3) Time to screen saver
The time to screen saver – is a time distance after which the screen saver will be
activated. The time to screen saver is presented in minutes.
Time change
The time may be changed after pressing the F3 key [
↵
] and by typing in a value
between 0 and 99 (only integers).
Value 0 means that the screen saver shall not be activated.
4) Change of calibration code
This function allows to change calibration code.
The original value is: 00000000.
This code should be entered before pressure calibration and current calibration
(item 9.5 see page 13).
Code entering
: see page 10, item 9).
I PRESSURE TRANSMITTERS
9.3. INFO
This tab enables viewing the transmitter’s parameters and data.
Pressing key F4 [REFRESH] causes renewed taking data from the transmitter.
The [REFRESH] function may also be activated by pressing key RE at any time.
The following parameters are available:
1)
IDENTIFICATION NUMBER
2)
MESSAGE Key F3 [>>>] enables scrolling through the whole message.
3)
DATUM
4)
TAB LABEL
5)
TAB DESCRIPTION
6)
SERIAL NUMBER
7)
CHARACTERISTIC
8)
UNITS
9)
UPPER LIMIT OF RANGE
10)
LOWER LIMIT OF RANGE
11)
BEGINNING OF ADJUSTABLE RANGE
12)
END OF ADJUSTABLE RANGE
13)
MINIMUM BREADTH OF RANGE
14)
TIME CONSTANT
15)
SAVING LOCK
Содержание BKAP-03
Страница 32: ......