Basher NITRO CIRCUS, Инструкция по эксплуатации

Страница: 10 / 25

There are 6 preset options for this item. You can customize the cutoff threshold by using an
advanced LCD program box (optional equipment) to trim it with a step of 0.1V, so it will be more
suitable for all kinds of batteries (NiMH, NiCd, Li-ion, Lipo, LFP,etc).
Please always keep in mind that
the customized value is not for each cell, it is for the WHOLE battery pack.
2.4.
Start Mode (Also called “Punch”):
Select from “Level1” to “Level9” as your like, Level1 has a
very soft start effect, while level9 has a very aggressive start effect. From Level1 to Level9, the start
force is increasing. Please note that if you choose “Level7” to “Level9” mode, you must use good
quality battery pack with powerful discharge ability, otherwise these modes cannot get the burst start
effect as you want. If the motor cannot run smoothly (the motor is trembling), it may caused by the
weak discharge ability of the battery pack, please choose a better battery or increase the gear rate
(Use a smaller pinion).
2.5.
Maximum Brake Force:
The ESC provides proportional brake function. The brake force is related
to the position of the throttle stick. Maximum brake force refers to the force when the throttle stick is
located at the top point of the backward zone. A very large brake force can shorten the brake time,
but it may damage the gears.
2.6.
Maximum Reverse Force:
Sets how much power will be applied in the reverse direction. Different
value makes different reverse speed.
2.7.
Initial Brake Force:
It is also called “minimum brake force”, and it refers to the force when the
throttle stick is located at the initial position of the backward zone. The default value is equal to the
drag brake force, so the brake effect can be very smoothly.
2.8.
Throttle Neutral Range
: Please refer to the following picture to adjust the neutral range as your
like.
9