BASF inge dizzer XL Series, Руководство по сборке

Страница: 29 / 44

Installation / Assembly
dizzer® XL Series Modules for Open Platform
– Assembly Instructions 1.1(2019-01) E inge
Page 29 of 44
© inge GmbH
5.3.2 Protecting the Work Area
Structure of the Work Area
The work area consists of the following areas:

The single parts of the dizzer
®
XL Series Modules that are in storage, have been unpacked, are
being tested and/or are being processed,

The currently processed dizzer
®
XL Series Modules,

The final location of the dizzer
®
XL Series Modules,
and additionally on all routes:

All required access routes to the areas specified above,

All required walking and driving distance between the areas specified above,

All escape routes from one of the area or routes specified above
Protecting the Work Area

Protect the defined work area against access by persons who are not involved in the procedures
for installing the dizzer
®
XL Series Modules.

Protect the defined work area against all machines or devices that are not required for the
procedures for installing the dizzer
®
XL Series Modules.
CAUTION
DANGER OF INJURY!
Danger of injury to bystanders, machines and devices in the work
area.

Protect the work area against unauthorized access and against
machines and devices that are not involved!