Version 07/13
PPC-5MU USB charger
Item no.
46 93 82
1. Intended use
Use this product to charge and operate Micro-USB devices. Power supply via a normal household power outlet.
The product features overload and short circuit protection mechanisms.
This product is suitable for use in dry interior spaces only.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and product
names are trademarks of their respective owners. All rights reserved.
2. Delivery content
• USB charger
• Operating instructions
3. Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous playing material
for children.
• Never use the product immediately after it has been brought from a cold room into a warm one. The
condensation generated could destroy the product. The power supply unit also involves danger to life by
electric shock!
• The mains outlet must be located near to the device and be easily accessible.
• As power supply, only use the supplied mains adaptor.
• Only connect the power adaptor to a normal mains socket connected to the public supply. Before plugging
in the power adaptor, check whether the voltage stated on the power adaptor complies with the voltage of
your electricity supplier.
• Never connect or disconnect power adaptors if your hands are wet.
• Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips on
the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses a risk of injury.
• For safety reasons, disconnect the power adaptor from the mains socket during storms.
• The product gets hot during use. Ensure sufficient ventilation and never cover the product during use.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
• Also observe the safety and operating instructions of any other devices which are connected to the product.
Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
4. Operation
Always turn off the device to be connected before connecting it to the product. Make sure
the connection is correct. If the product is not connected properly, it could overheat or
cause an electric shock or fire.
Make sure that your device is suited for use with the product‘s connection values. Observe
the information in chapter “Technical data”.
Exceeding these values will overload the product. If the power adaptor is overloaded (i.e.
via short-circuiting or continuous power drain) the output turns off to prevent malfunction.
You can continue use of the product after removing the source of the overload.
1. Connect your turned off Micro-USB device to the Micro-USB plug.
2. Connect the product to a common household power outlet. The product’s power indicator lights up to show
that the product is ready for use.
3. The connected device will now charge. If you wish to operate the connected device, turn it on now.
4. Turn off the connected device before disconnecting it from the product.
5. After use, unplug the product.
5. Maintenance and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions
as they can cause damage to the housing and malfunctioning.
• Before cleaning, disconnect the product from the power source and from the connected device.
• Never submerge the product in water.
• Repairs and maintenance may be carried out by a professional only. There are no components located
inside the product you need to maintain. Never open/dismantle the product.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much pressure to the housing
as this may cause scratch marks.
• Use a longhaired, soft and clean brush and a vacuum cleaner to easily remove dust.
6. Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
7. Technical data
Input voltage:
100 – 240 V/AC, 50/60 Hz
Output voltage:
5 V/DC
Output current:
1000 mA
Output power:
5 W
Plug type:
Micro-USB
Operating conditions:
0 to +40 ºC, 20 – 90 % RH
Storage conditions:
-20 to +60 ºC, 10 – 90 % RH
Cable length:
1 m
Dimensions (W x H x D):
47 x 27 x 53 mm
Weight:
62 g
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also
in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
© 2013 by Conrad Electronic SE.
V1_0713_02-ETS-Mkde
