Overview
1
2
3
4
5
6
7
8
9
1 Fan status LED
2 Fan button
3 MicroUSB charging port
4 Charging status LED
5 Foldout stand
6 Light button
7 LED Light
8 Mirror
9 Mirror cover
Recharge the product battery
1. Connect one end of the charging cable to a suitable power supply and the other end to the
MicroUSB charging port on the product.
2. The charging status LED shows the progress (ON: charging/OFF: fully charged).
Operation
a) Fan
1. Press and hold the fan button to switch the fan ON (low speed).
2.
Press the fan button repeatedly to cycle through speed settings: medium →high → OFF.
b) Light
1. Press and hold the light button to switch the light ON (low light).
2.
Press the light button repeatedly to cycle through brightness settings: medium →high →
OFF.
Care and cleaning
Important
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions
as they can cause damage to the housing and malfunctioning.
• Switch the power off and disconnect all cables before each cleaning.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house
-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines. You thus fulfill your statutory obligations and con-
tribute to the protection of the environment.
Technical data
Input voltage/current ..................... MicroUSB 5 V/DC, 1 A
Rechargeable battery ...................
3.7 V 2000 mAh Li-ion
Battery charging time .................... approx. 3.5 hrs
LED brightness ............................. 3 (low, med, high)
Fan speeds ................................... 3 (low, med, high)
Operating time (hrs) .....................
3 - 8 hrs (depending on LED brightness and fan settings)
Operating conditions .....................
0 to +45 ºC, 40 – 85 % RH (non-condensing)
Storage conditions ........................
-10 to +35 ºC, 40 – 85 % RH (non-condensing)
Dimensions (H x W x D) ............... 173 x 80 x 33 mm
Weight .......................................... 127 g
Operating Instructions
Mini Rechargeable Hand-
held Fan with Mirror
Item No. 2345472
Intended use
The product is a mini rechargeable fan with
integrated mirror, light, and stand.
Contact with moisture must be avoided under
all circumstances.
For safety and approval purposes, you must
not rebuild and/or modify this product. If you
use the product for purposes other than those
described above, the product may be dam
-
aged. In addition, improper use can result in
other hazards. Read the instructions care
-
fully and store them in a safe place. Make this
product available to third parties only together
with its operating instructions.
This product complies with the statutory na
-
tional and European requirements. All compa
-
ny names and product names are trademarks
of their respective owners. All rights reserved.
Delivery content
• Product
• Charging cable
(MicroUSB to USB-A)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the
website.
Explanation of symbols
The symbol with the exclamation
mark in the triangle is used to indi
-
cate important information in these
operating instructions. Always read
this information carefully.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do
not follow the safety instructions
and information on proper han-
dling in this manual, we assume
no liability for any resulting per-
sonal injury or damage to prop-
erty. Such cases will invalidate
the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the
reach of children and pets.
• Do not leave packaging material lying
around carelessly. This may become dan
-
gerous playing material for children.
• Protect the appliance from extreme tem
-
peratures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases,
steam and solvents.
• Do not place the product under any me
-
chanical stress.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about the
operation, safety or connection of the ap
-
pliance.
• If it is no longer possible to operate the
product safely, take it out of operation and
protect it from any accidental use. Safe
operation can no longer be guaranteed if
the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in
poor ambient conditions or
-
has been subjected to any serious trans
-
port-related stresses.
•
Maintenance, modifications and repairs
must only be completed by a technician or
an authorised repair centre.
• If you have questions which remain un
-
answered by these operating instructions,
contact our technical support service or
other technical personnel.
b) LED light
• Attention, LED light:
-
Do not look directly into the LED light!
-
Do not look into the beam directly or with
optical instruments!
c) (Rechargeable) batteries
• The rechargeable battery is permanently
built into the product and cannot be re
-
placed.
• Never damage rechargeable batteries.
Damaging the casing of rechargeable bat
-
terie might cause an explosion or a fire!
•
Never short-circuit the contacts of the
rechargeable battery. Do not throw the
battery or the product into fire. There is a
danger of fire and explosion!
• Charge the rechargeable batteries regu
-
larly, even if you do are not using the
product. Due to the rechargeable battery
technology being used, you do not need
to discharge the rechargeable battery first.
• Never charge the rechargeable batteries of
the product unattended.
• When charging, place the product on a
surface that is not heat-sensitive. It is nor-
mal that a certain amount of heat is gener
-
ated during charging.
d) Product
• RISK OF INJURY. Keep children away
from the fan. Fingers can get injured if they
come into contact with moving fan blades.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. *2345472_v1_0121_02_dh_m_en
