manualshive.com logo in svg

Base Line Cloud Network BL-CLOUD-WFE, Руководство по установке и настройке, Страница: 3 / 25

Поделиться
Скачать
Base Line Cloud Network BL-CLOUD-WFE Скачать руководство пользователя страница 3

3

866 294 5847      |     baselinesystems.com     |     [email protected]

BASELINE CLOUD NETWORK MODULE

Before beginning, familiarize yourself with the parts labeled in the illustrations below. 

Two types of communication boards available. The Cloud Network Module wth 4G LTE configuration and the Cloud 

Network Module with Wi-Fi configuration.

Cloud Network Module Diagram

A. 5-pin connector for cable to the controller board (Com labeled connector)

B. Connector for the Wi-Fi antenna (not used for cell configuration)

C. Ethernet connector 

D. Reset switch and status LED 

E. Cell module with antenna cable adaptor

When receiving the Cloud Network Module, inspect the antenna cable on the back of the Cloud Network Module to ensure 

that it is securely connected. 

Cloud Network Module with 4G Configuration

Cloud Network Module with Wi-Fi Configuration

A. 5-pin connector for cable to the controller board (Com labeled connector)

B. Connector for the WiFi antenna

C. Ethernet connector 

D. Reset switch and status LED 

E. Connector for the cell module (not used for Wi-Fi configurations)

BL-CLOUD-WFE

BL-CLOUD-LTE

Содержание Cloud Network BL-CLOUD-WFE


























Отзывы:

Нет отзывов