Installation Manual
© 2018 basalt
e v1.0
Installation instructions
1. Install square wall box (60mm) or compatible round wall box.
Wall box should have screws with a vertical distance of 60mm and minimal depth of 45mm.
2. Connect the 24V DC power lines using the terminals.
3. Fix the wall base to the wall box with 2 screws using the holes on vertical axis.
4. Mount the cover using the clips. ( see drawing a & b )
Cabling
The cable between the DC power supply and wall base must have a cable section of at least 0.8mm² and maximum 1.5mm².
The applicable maximum cable lengths are specified both 12V and 24V.
To limit power loss in the cable, we recommend using a star wiring from the power supply to each single wall base.
We advise to automatically put the iPad in standby mode when not in use to reduce power consumption.
Maximum cable length between DC power supply and wall base
Cable type
12V DC
24V DC
0.8mm² (AWG 19)
50m (164ft)
300m (984ft)
1.0mm² (AWG 18)
60m (197ft)
400m (1312ft)
1.5mm² (AWG 17)
90m (295ft)
500m (1640ft)
How to remove the Socket front cover
( see drawing c & d )
EVE Plus wall base 24V
Technical data
Power supply:
10 - 30 V DC
Consumption:
Input power 12W
Operating temperature:
0°C - +35°C
basalte bvba | hundelgemsesteenweg 1A | 9820 merelbeke | belgium
t +32 (0)9 385 78 38 | f +32 (0)9 329 66 95 | www.basalte.be | [email protected]
PUSH UP
PULL BACKWARDS
PUSH FORWARD & CLICK ON THE CLIPS ABOVE
CLICK ON THE CLIPS BELOW
a
b
c
d
