Removing the iPad mini 4
1. Remove the Eve cover.
2. Place one finger behind the iPad (side with magnets) and
another one on the right side of the iPad as shown on
drawing 7 (a).
3. Gently pull the iPad out of the frame making sure it
cannot fall (b).
4. Remove the power connector.
Dimensions Eve mini 4
Set:
230 mm/9.05” x 138 mm/5.43” x 11 mm/0.43”
_
Frame: 227 mm /8.94” x 138 mm/5.43” x 11 mm/0.43”
Cover: 24 mm/0.94” x 138 mm/5.43” x 11 mm/0.43”
Basalte bvba
Hundelgemsesteenweg 1a
9820 Merelbeke
Belgium
tel +32 9 385 78 38
fax +32 9 329 66 95
www.basalte.be
Basalte is a registered trademark of Basalte bvba.
Eve is a registered trademark of Basalte bvba.
Eve, Eve mini 1, 2 & 3, Eve mini 4, Eve Air and Eve touch are
registered designs of Basalte bvba.
iPad, iPad mini, iPad Air and iPod touch are registered
trademarks of Apple Inc.
Made in Belgium
v1.0 2015 basalte
©
Identification of the parts
a Eve mini 4 frame for iPad mini 4
(product number: 625-xx)
(not compatible with iPad mini 1, 2 & 3)
b Eve mini cover
(product number: 621-xx, 622-xx - not included)
c Eve mini cover security version
(product number: 623-xx, 624-xx - not included)
Positioning of the wall box
(not included)
A wall box should be foreseen to install the iPad power supply.
The puck
(not included)
is a USB power supply which fits into a
1-gang wall box and uses the standard lightning to USB Cable,
supplied with the iPad.
The wall box should be installed according to the dimensions on
the drawing (2).
Direction of the frame
The Eve frame can be mounted horizontally or vertically.
Please take care to mount the frame in the correct direction
according to the drawing (3).
Installing the frame in the wrong
direction can damage the iPad.
Puck Power supply
(not included - product number: 610-01)
Install the puck into the wall box following the instructions of
the puck manual. Connect the standard iPad mini to USB Cable,
supplied with the iPad, to the puck.
Installing the frame
Please use the correct openings of the Eve frame and ensure the
screws are positioned so that they cannot damage the iPad.
Mounting the iPad mini 4
1. Plug the power connector into the iPad.
2.
Portrait mounting:
Place the right side of the iPad in the right
side of the frame as shown on drawing 6 (a) (opposite side of
the magnets). Then gently push the iPad in the frame so that it
is being held by the magnets (b).
Landscape mounting:
Place the right side of the iPad in in the
lower side of the frame as shown on drawing 6 (a) (opposite
side of the magnets). Then gently push the iPad in the frame so
that it is being held by the magnets (b).
3. Place the Eve cover making sure that the cover is not squeezing
the power cable.
Make sure to follow the steps above in the right order as a
wrong installation can damage the frame.
mini 4
1
2
3
4
5
6
7
