Installation Manual
ASANO M3
© 2019 basalt
e v1.0
How to install
- Power supply (1)
The Asano M3 has to be powered by a Euro mains power lead with a 230V AC input.
Do not unplug the connector at this side with voltage present.
- Inputs (3-4)
Additional sources can be connected to the optical input and 3.5 mini jack input.
- Audio Network (7)
Connect Asano M3 to the audio network using Ethernet CAT5e cable. The network has to be a dedicated network
separated from your local data network.
- Loudspeaker outputs (8)
The 2 amplified zone outputs need to be connected on a separate connector per zone.
The connectors are dismountable from the unit. Each cable can be connected through screw terminals allowing a
cable connection up to 2.5mm².
basalte bvba | hundelgemsesteenweg 1A | 9820 merelbeke | belgium
t +32 (0)9 385 78 38 | f +32 (0)9 329 66 95 | www.basalte.be | [email protected]
Technical data
Power:
100V - 240V AC
Analog input sensitivity:
2 V zRMS
Minimum loudspeaker load:
3 Ohm
Speaker output power at 4 Ohm:
4 x 50W
Bridged output power at 4 Ohm:
2 x 100W
Ambient temperature:
Operation: -5°C to 45°C
Storage:
-15°C to 55°C
Transport: -15°C to 55°C
Dimensions:
w 330 x h 50 x d 180 mm
Weight:
1,8 kg
Max. humidity:
93% relative humidity, no moisture
condensation
Protection class:
II
Type of protection:
IP 20
Certification:
CE
1
5
7
8a 8b
2
4
3
6
L+ L- R- R+
Normal:
L+ L- R- R+
Bridged:
-
+
