Installation Manual
ASANO A4
© 2019 basalt
e v1.0
How to install
- Power supply (1)
The Asano A4 has to be powered by a Euro mains power lead with a 230V AC input.
Do not unplug the connector at this side with voltage present.
- Audio Network (3)
Connect Asano A4 to the audio network using Ethernet CAT5e cable. The network has to be a dedicated network
separated from your local data network.
- Inputs (4)
Additional sources can be connected to the 3 analogue inputs.
- Trigger output (5)
Each zone has a seperate trigger output to switch on and of the amplifier or active speaker.
- Loudspeaker outputs (6)
The 4 analogue zones are connected with RCA connectors.
basalte bvba | hundelgemsesteenweg 1A | 9820 merelbeke | belgium
t +32 (0)9 385 78 38 | f +32 (0)9 329 66 95 | www.basalte.be | [email protected]
1
4a
6a
4b
6b
4c 5a
6c 6d
3
5b
2
Technical data
Power:
220V - 240 V AC
Power consumption:
5W
Analogue input sensitivity:
2V RMS
Ambient temperature:
Operation: -5°C to 45°C
Storage: -15°C to 55°C
Transport: -15°C to 55°C
Dimensions:
w 330 x h 50 x d 180 mm
Weight:
1,5 kg
Max. humidity:
93% relative humidity,
no moisture condensation
Protection class:
II
Type of protection:
IP 20
Certification:
CE
+ - + -
+ - + -
