Installation instructions
1. Install square wall box (60 mm) or compatible round wall box.
Wall box should have screws with a vertical distance of 60 mm and minimal depth of 35 mm.
2. Connect the 230V lines using the screwless terminals.
3. Fix the via to the wall box with 2 screws using the holes on vertical axis.
4. Mount the cover frame using the clips. Make sure to align the LED with the frame in the correct position.
How to remove the Via front cover
( see drawing c & d )
PUSH FORWARD & CLICK ON THE CLIPS ABOVE
CLICK ON THE CLIPS BELOW
Installation Manual
© 2018 basalt
e v1.0
VIA walkway light 230V
basalte bvba | hundelgemsesteenweg 1A | 9820 merelbeke | belgium
t +32 (0)9 385 78 38 | www.basalte.be | [email protected]
PUSH UP
PULL BACKWARDS
Do not use a screwdriver or other tools, as these might damage the cover.
We provide a ‘xxx’ tool to remove the socket front cover when it is not easy to remove by hand.
Technical data
Rated voltage :
230 V AC - 50Hz
Non dimmable
Power consumption:
1W
Ambient temperature:
Operation:
-5°C to 45°C
Storage:
-15°C to 55°C
Transport:
-15°C to 55°C
Protection class:
I
Type of protection:
IP 20
LED color temperature:
4500 K
a
b
c
d
