SETTING THROUGH WEB INTERFACE
To configure the outdoor panel through the WEB-interface, you must connect
to it with a web browser on a PC. The panel must be connected to the same
local network segment as the PC from which you plan to make the settings.
In the Internet browser in the address bar, enter the IP-address of the outdoor
panel, and then enter the username and password. The username to enter the
settings: admin. The password required for entry must match the password
for access to the outdoor panel settings and is an installer’s password, default:
123456.
1. Network Settings.
Select «Network» to access the network configuration settings:
2. Device Settings.
Select «Device» to access the configuration of the logical address, the operating
mode and ringtones:
31
