BAS-IP 5060514912737, Руководство пользователя

Страница: 3 / 12

3
Eng
Completness check of the product
Before installing the monitor, be sure to check that it is complete and all
components are available.
The monitor kit includes:
Monitor
Manual
Wall mounting bracket
Set of wires with connectors for connection of alarm loops, external
dynamics and home automation
Resistors for alarm sensors
Installation screws
1 pc
1 pc
1 pc
1 pc
8 pcs
2 pcs
After verifying the device's completeness, you can switch to the monitor
connection.
To connect monitor you will need:
Electrical connection
An Ethernet UTP CAT5 or higher cable connected to a PoE switch or
to
a normal switch/router.
Cable length recommendations
The maximum length of the UTP CAT5 cable segment shouldnot exceed 100 meters,
according to the IEEE 802.3 standard.
Power supply at +12 Volts DC if there isn't PoE.
Wires must be brought for the connection of alarm loops and home
automation (optional).
The connection scheme of all components
1 2
Power
+12 V GND
LAN (PoE)
RS485
1 2 3 4
+12 V GND 485+ 485-
1 2
3
4
5
6 7 8 9 10
GND
+Us
AL1 AL2 AL3 AL4 AL5 AL6 AL7 AL8
+
12
V
G
N
D
C
O
M
N
O
Siren/Alarm Loops
Doorbell