- 28 -
Setting
•
Put the device on an even, stable, dry surface which is resistant to high temperature.
•
Never place the device on an inflammable surface.
•
Do not place the device near inflammable materials (e.g. curtains) or objects
(wardrobe etc.). Risk of fire!
•
Keep a distance of at least 100 cm from the walls and other objects and 30 cm from
the top of the device to the ceiling or other structures.
•
Never place the device in the direct proximity of pools, ponds, bathtubs, in shower
rooms.
•
If possible, do not place the device in passages to avoid tilting as a result of
accidental touching of the infrared heater.
NOTE!
The device is equipped with a safety device which automatically
disconnects the heating tubes in case of hitting or tilting over of the
infrared heater (e.g. in an instance of device tilting over due to high wind).
•
When placing the device, make sure that the power cord is laid in such a way as to
avoid tipping or entanglement.
•
Place the device so that the plug is easily accessible so as to quickly disconnect the
device from the power supply if the need arises.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid specification should
be compared with that of the device (see rating plate). Connect the device only
in case of compliance!
Connect the device only to properly installed single socket with
protective terminal.
•
Never connect the device to the power source before the completion of installation.
•
The electrical circuit of the socket must be secured to at least 16A. Connect the
device only directly to the wall socket, use of extension cords or power strips is
forbidden.