- 25 -
6. Cleaning and maintenance
6.1 Safety advice
o
Before beginning with repair or cleaning works make sure the device has been
disconnected from the power socket (pull the power plug!!!) and has cooled down.
o
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o
Clean the device regularly.
o
Clean the interior and exterior surfaces of the equipment with a moist, soft cloth and
a mild cleaning agent. Dry the equipment thoroughly.
o
Remove the grid and drip collecting tray from the equipment and clean with a mild
cleaning agent, then rinse thoroughly. Dry all parts thoroughly.
o
Use soft cloth only and make sure you never use any kind of abrasive agents or
pads, which could scratch the surface.
o
After the cleaning procedure you should use a soft and dry cloth to wipe dry and
polish the surface.
o
Make sure the device has been cleaned and dried properly for further usage.
6.3 Safety instructions for maintenance
o
Check the mains lead from time to time to ensure it is not damaged in any way.
Never use the device if the lead is damaged. A damaged cable must immediately be
replaced by customer service or a qualified electrician to avoid dangers.
o
In case of damage or malfunction, please contact your stockist or our customer
service centre.
o
Only a qualified technician using original spare parts and accessories should carry
out repairs and maintenance of the device. Do not attempt to repair the device
yourself.
Содержание Salamander 100
Страница 2: ...2...
