- 33 -
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the
electric shock
hazard
will occur.
Do not use any acid agents and make sure no water ingresses
the device.
Never
operate the device with moist hands or standing on
wet floor.
Disconnect the device from the electric power supply.
-
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
WARNING! Injury hazard!
To avoid the hazard results please follow the safety instructions
below.
Never put hands between the knife and the pusher handle or
the movable slice thickness wall until it is completely secured
(slice thickness adjustment set to
“0”
).
During operation keep the hands away from the blade in order
to avoid cuts and accidents. In order to avoid accidents, always
use the pusher handle to push the product to be sliced to the
movable slice thickness wall!